Supported devices
DCImanager uses modules (device handlers) to manage equipment. The following is a complete list of handlers and their description.
DCImanager can manage the following types of server equipment:
- IPMI;
- Intel AMT;
- switches;
- routers;
- PDU.
- UPS;
- sensors.
Devices are connected to servers for managing, monitoring, collecting information, etc.
Switch handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| Brocade FCX(SNMP) | For Brocade FCX. | SNMPv1/v2c/v3 at your choice | Brocade FCX624 |
| Brocade ICX(Mult) | For Brocade ICX. Supports Private VLAN. | SNMPv1/v2c/v3 at your choice and Telnet. Mult indicates that you need to specify the access both through SNMP and Telnet | Brocade ICX6450-48 |
| Cisco Catalyst (SNMP) | For Cisco on Catalyst OS. | SNMPv1/v2c/v3 at your choice | Cisco C3560, C2960 |
| Cisco Small Business | For Cisco from the Small Business family. | SNMPv1/v2c/v3 at your choice | |
| Cisco Small Business SF-300-24 (Read Only) | For Cisco from the Small Business family. | SNMPv1/v2c/v3 at your choice | Cisco SF-300-24 |
| Cisco C49xx (SNMP) | For Cisco C49XX. | SNMPv1/v2c/v3 at your choice | Cisco C4948 |
| Cisco C45xx (SNMP) | For Cisco C45XX. Including Cat 4948. | SNMPv1/v2c/v3 at your choice | Cisco C4948, Cisco C4500X |
| Cisco Nexus | For Cisco Nexus. Most operations are performed through NxAPI. Enable the NxAPI access in the switch settings. | NxAPI and SNMPv1/v2c/v3 at your choice | Cisco Nexus 5548 |
| HP (SNMP) | For HP switches. | SNMPv1/v2c/v3 at your choice | HP 2610-48 |
| D-Link SNMP | For D-Link switches. | SNMPv1/v2c/v3 at your choice | D-Link DGS-3100-48 |
| D-Link 3200B SNMP | For D-Link switches. | SNMPv1/v2c/v3 at your choice | D-Link DES-3200-28 (Hardware Revision: B1) |
| D-Link 3200C SNMP | For D-Link switches. | SNMPv1/v2c/v3 at your choice | D-Link DES-3200-28 (Hardware Revision: C1) |
| Eltex MES2XXX | For Eltex with the version MES2000. | SNMPv1/v2c/v3 at your choice | Eltex MES2348 |
| Eltex MES5XXX | For Eltex with the version MES5000. | SNMPv1/v2c/v3 at your choice | Eltex MES5248 |
| Juniper (NETCONF) JunOS 12 | For Juniper with JunOS 12. | NETCONF, SSH | EX22xx, EX32xx, EX42XX |
| Juniper (NetConf) JunOS 13 | For Juniper with JunOS 13. | NETCONF, SSH | EX43xx |
| Juniper (NETCONF) JunOS 15 | For Juniper with JunOS 15. | NETCONF, SSH | EX22xx, EX32xx, EX42XX |
| Zyxel GS2200 | For Zyxel GS2200 switches. | SNMPv1/v2c at your choice | Zyxel GS2200-8, GS2200-24 |
| Zyxel XGS L3 Switch | For Zyxel XGS switches. | SNMPv1/v2c at your choice | XGS-4728F |
| SNMP Common | For any switches that can manage SNMP. However, we recommend using the handler that meet all requirements to your device. | SNMPv1/v2c/v3 at your choice | HP 2610-48, Cisco C35xx, C29xx |
| SNMP Huawei | For Huawei switches. | SNMPv1/v2c/v3 at your choice | |
| SNMP Common V2 | Similar to SNMP Common, but provides more advanced functionality. You can use it if SNMP Common cannot collect statistics from your devices. SNMP Common uses Cisco OID portIndex to index ports when collecting statistics, therefore statistics cannot be collected on a number of devices. New SNMP Common V2 uses standard IfIndex, allowing for statistics collection on most devices. SNMP Common V2 requires IfIndex preservation between re-initializations that is performed with a specific switch command. Please, contact a manufacturer of your device for more information. | SNMPv1/v2c/v3 at your choice | Cisco C35xx |
| Arista | Based on SNMP Common V2, but also can work with VLAN and manage port speed via Arista Command API. You need to enable eAPI in the switch settings. | eAPI and SNMPv1/v2c/v3 at your choice | DCS-7010T-48-R |
| Eltex 2XXX | For Eltex switches. It is likely that it will also work on Eltex with other versions. If this handler doesn't work, you may try to use 5XXX. | SNMPv1/v2c/v3 at your choice | MES2348 |
| Eltex 5XXX | For Eltex 5XXX switches. | SNMPv1/v2c/v3 at your choice | MES5248 |
Router handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| Juniper Router (NetConf) | For router management. | NETCONF, SSH | EX9200 |
PDU handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| APC PDU (SNMP) | For APC PDU. | SNMPv1/v2c/v3 at your choice | AP7930 |
| Racktivity PDU (SNMP) | For Racktivity PDU. | SNMPv1/v2c | PM0816-01 |
| Eaton PDU (SNMP) | For Eaton PDU. | SNMPv1/v2c/v3 at your choice | Eaton ePDU G3 |
UPS handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| Liberty NX UPS | For UPS Emerson Liberty NX with a web-card. | SNMPv1/v2c at your choice | Emerson Liberty NX UPS |
IPMI handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| IPMI v1.5/v2.0 | For IPMI that works through the IPMI v1.5/v2.0 protocols. | IPMI IPMI v1.5/v2.0 | SuperMicro IPMI |
| IPMI v2.0 (lanplus) | For IPMI that works through the IPMI v2.0 (lanplus) protocol. | IPMI v2.0 (lanplus) | iLO 3, iDRAC |
Intel AMT handlers
| Handler | Information | Protocols | Tested on |
|---|---|---|---|
| Intel AMT Common | For Intel AMT that works through the WS-Management(WS-Man) protocol. | WS-Management | Intel AMT v.7 |