Supported devices
DCImanager supports management of the following types of equipment:
- switches;
- power distributors (PDU);
- IPMI.
DCImanager uses special modules called handlers to manage the equipment. The article contains information about available handlers and their compatibility with specific models of equipment.
Note
Handlers described below may operate incorrectly with particular devices. Full functionality of the handler is guaranteed for devices from the column Tested on devices with the specified version of firmware.
Switch handlers
| Handler | Tested on devices | Information | Protocols used |
|---|---|---|---|
| SNMP Common | Cisco Catalyst WS-C3560E-24TD (SW Version: 12.2(58)SE1) Cisco Catalyst 2960 | Suitable for most switches that support SNMP management. We recommend using a special handler for Cisco Catalyst switches. | SNMPv1/v2c/v3 |
| Cisco Catalyst (SNMP) | Cisco Catalyst WS-C3560E-24TD (SW Version: 12.2(58)SE1) Cisco Catalyst 2960 | Suitable for some Cisco switches running on Catalyst OS. | SNMPv1/v2c/v3 |
| Cisco Nexus | Cisco Nexus 5000 Switch (System version: 7.1(1)N1(1)) | Suitable for some Cisco Nexus Series switches. Most operations are performed via NxAPI. Enable NxAPI access in the switch settings. | NxAPI |
| Juniper (NetConf) | Juniper EX2200-48T-4G (Junos: 15.1R6.7) | Suitable for some Juniper switches. | NetConf, SSH |
| Juniper ELS (NetConf) | Juniper EX4300-48P (Junos: 18.4R2.7) Juniper EX3400-48T (Junos: 15.1X53-D591.1) | Suitable for some Juniper switches with ELS support. | NetConf, SSH |
| Juniper Junos 12 (NetConf) | Model: EX4200-48PX (Junos: 12.3R12-S12) | Suitable for some Juniper switches with ОС Junos 12.X. | NetConf, SSH |
| Arista | Arista DCS-7010T-48-R (Software image version: 4.21.10M-INT) | Suitable for use with some Arista switches. Enable eAPI in the switch settings for connection. | eAPI |
PDU handlers
| Handler | Tested on devices | Information | Protocols used |
|---|---|---|---|
| APC PDU (SNMP) | APC AP7953, AP8953, AP8959 | Suitable for use with some APC PDUs. | SNMPv1/v2c/v3 |
IPMI handlers
| Handler | Information | Protocols used |
|---|---|---|
| IPMI v1.5/v2 | Suitable for IPMI devices that use the IPMI v1.5/v2.0 protocol. | IPMI v1.5/v2.0 |
| IPMI v2 (lanplus) | Suitable for IPMI devices that use IPMI v2.0 (lanplus) protocol. | IPMI v2.0 (lanplus) |
Connection to the IPMI web interface is supported for most equipment manufacturers; connection to the IPMI console — for Supermicro, Cisco, HP iLO3, iLO4, Dell iDRAC 8 equipment.
Intel AMT handlers
| Handler | Information | Protocol used |
|---|---|---|
| Intel AMT | Suitable for Intel AMT devices that use the WS-Management (WS-Man) protocol. | WS-Management |